Manual Carburador Weber 446
.User Manual.Table of Contents In the Box Quick Start Instructions Getting Started Weber iGrill App Battery Replacement Powering On & Off Connecting Disconnecting Mounting Probe Use Probe Wrap Use Using the iGrill 2 Display Probe Toggle Buttons Proximity Sensor Custom & Preset Alarms. 2 Colored Probe Indicators (Yellow and Red). 1 Optional Magnetic Disc. Quick Start Guide Quick Start Instructions 1. Download the Weber iGrill App from the App Store or Google ® Play Store on one of the following compatible devices: ®.Getting Started Weber iGrill App The Weber iGrill App provides all of the functionality and customization you will need to get the most out of your iGrill 2.
The Weber iGrill App is compatible with the following devices:. iPhone (4S and later) ®.Battery Replacement To replace your iGrill 2 batteries, follow these steps:. Separate the iGrill 2 from its base by firmly holding the base with one hand and gently pulling the iGrill 2 top upwards with the other hand. On the underside of the iGrill 2, press down on the tab and remove the battery door.®.
While turned on, place your iGrill 2 next to your smart device and open the Weber iGrill App. Your smart device will automatically recognize any available iGrill products and display them in the ‘Available Devices’ drop-down. You can view the ‘Available Devices’.Disconnecting While turned on, place your iGrill 2 next to your smart device and open the Weber iGrill App. Your smart device will automatically recognize any available and previously connected iGrill products. You can display them in the ‘Available Products’ drop-down by tapping the 3 lines or dots at the top right-hand corner of the screen.
Let the magnetic disc bond to the surface for 6-12 hours before mounting your iGrill 2 to the disc. Place your iGrill 2 on the magnetic disc.
The magnetic base is not designed to withstand high heat and it must be placed on a cool surface. If the surface is too hot to touch, it’s too hot for the iGrill 2 base! Probe Use.The probes are not waterproof and damage may result from water exposure.
Never submerge your probes in water. Temperatures below -22°F or above 572°F (-30ºC or above 300ºC) will not display in the Weber iGrill App and will cause the probe to disappear from connection. Probe Wrap Use To wrap your probe(s):.Display. Displays temperature of currently active probe. Displays “DC” for temperatures below -22°F (-30ºC). Displays “DH” for temperatures above 572°F (300ºC).
Displays “OFF” during power off sequence. Animates during power on sequence and during reset. Bluetooth ®.® ® ® If you are having issues hearing the alarms from the Weber iGrill App, try these steps:. Open Settings on your iOS device. Tap ‘Notification Center.’.
Under the ‘Include’ section, locate and tap ‘Weber iGrill.’.Setting Up A Cook The Weber iGrill App offers preset alarms for many types of meats and cooking temperatures. Tapping a preset alarm will set it. You can also create your own custom preset alarm for any desired temperature. There are two different types of presets:.The default Pre-Alarm is 10 degrees away, but this can be set to 5°, 10°, 15° and 20°F in your device settings. This feature is on the Weber iGrill App.
You can acknowledge the alarm from the app or by pressing.Timers menu. Globe Tool The Globe Tool will display other users of the Weber iGrill App. Tapping on a pin will display a user-posted message and picture. Take a look at what other cooks around the world have made to ignite ideas for your next.The following information covers some of the most common troubleshooting issues with the iGrill 2. If you need further assistance, please review the iGrill 2 FAQ page at support.weber.com or contact our iGrill 2 support team by emailing support@weberstephen.com. You can also call us at (800) 446-1071 for further assistance.®. Tap on the Weber iGrill logo in the black toolbar at the top of the app.
Select your iGrill 2 from the ‘Available Products’ drop-down. Your smart device will pair with the iGrill 2 and you will then be.® ® The Weber iGrill App requires iOS 7.0 or higher to operate. If you are experiencing a problem with the Weber iGrill App for iOS, please try following the steps below to resolve any potential problems on the device:.The alarm settings, timer tool, globe tool, graph tool and probe renaming features for the iGrill 2 require the use of the Weber iGrill App and a compatible Bluetooth Smart Ready device.® ® your Android™ device. Go to your device manager and quit the Weber iGrill App. Now you can complete the following steps to pair your device:. Re-open the app by tapping on the Weber iGrill App icon.a residential installation. This equipment generates, uses, and can radiate radio frequency energy.
If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
.GAS GRILL Built-In LP Gas Grill Installation Guide S-460 ™ S-660 ™ YOU MUST READ THIS OWNER’S GUIDE BEFORE OPERATING YOUR GAS GRILL DANGER If you smell gas: 1. Shut off gas to the appliance. Extinguish any open flames. 3.Do not use a flame to check for gas leaks. Combustible materials should never be within 24 (60.96cm) inches of the top, bottom, back or sides of your Weber barbecue. Do not put a barbecue cover or anything flammable on, or in the storage area under the barbecue.Side Burner Opening Access for electric on left hand side. Clearance from any surface or structure is at least 24” (609.6mm) from the back and sides of the grill or side burner.
WWW.WEBER.COM ® BUILT-IN CUTOUT DIMENSIONS BUILT-IN CUTOUT DIMENSIONS S-460™.PARTS LIST Left Door - 1 Right Door - 1 Warming Rack - 1 Right Enclosure Panel - 1 Left Enclosure Panel - 1 Front Vent Panel - 1 Rear Vent - 1 Corrugated Gas Line - 1 WWW.WEBER.COM ®.Left Front Vent Clip - 1 Rotisserie - 1 Rotisserie Fork - 4 Rotisserie Motor - 1 Rotisserie Bracket - 1 Handle - 2 WWW.WEBER.COM ® PARTS LIST Smoker - 1 Smoker Bar - 1 1/2 inch Bolts (¼-20 x 1/2 inch Bolt) - 10.ASSEMBLY Arrow stickers on Frame Rail (1) and Left Side Panel (2) should point toward each other (shown above). Door Stop Bracket (3) should be positioned as shown (left). WWW.WEBER.COM ®.ATTENTION! Do not fully tighten screws. Clips should slide freely when installed.
Manual Carburador Weber 446 Tractor
WWW.WEBER.COM ® ASSEMBLY.ASSEMBLY Back WWW.WEBER.COM ®.ASSEMBLY WWW.WEBER.COM ®.Adjust the Front Vent to rest squarely on ground. ASSEMBLY ® Built-In frame assembly.
CLE AR AN CES 24' (610 mm) Any Surface Grill Frame Note: For a countertop treatment: Recommended 19.1 mm (3/4˝ inch) overhang. Notch front edge for frame to fully slide in. WWW.WEBER.COM ®.S-460™ WWW.WEBER.COM ® ASSEMBLY ATTENTION! Before applying any silicone sealant make sure the cookbox is flush with the front of the grill frame. 1/4' (6.35 mm) Drill Bit Apply a bead of silicone sealant (1) around the perimeter and front edges of the grill that are in contact with the “island”.S-460™ ASSEMBLY BATTERY HOUSING WIRING BLACK WIRE GREEN WIRE RED WIRE RED WIRE WARNING: Make sure that all control knobs are turned to the OFF position before connecting the gas supply and operating the grill. WWW.WEBER.COM ®.WWW.WEBER.COM ® ASSEMBLY Requires 3 “D” alkaline batteries (Included). Use alkaline batteries only.
Manual Carburador Weber 446 For Sale
Do not mix old and new batteries or different types of batteries (standard, alkaline or rechargeable). Note: Secure wire to side panel.S-460™ S-460™ ASSEMBLY S-660™ S-660™ WWW.WEBER.COM ®.S-460™ Match Holder WWW.WEBER.COM ® ASSEMBLY S-660™.ATTENTION! Before drilling any holes for the rear vent make sure the cookbox is flush with the front of the grill frame. ASSEMBLY 1/4' (6.35 mm) Drill Bit WWW.WEBER.COM ®.ASSEMBLY S-460™ S-660™ S-460 ™ S-660 ™ WWW.WEBER.COM ®.ASSEMBLY S-460 ™ S-660 ™ S-460™ S-660™ WWW.WEBER.COM ®.ASSEMBLY S-460™ S-660™ WWW.WEBER.COM ®.ASSEMBLY ™ S-460 ™ S-660 WWW.WEBER.COM ®.S-660 ™ ™ The Weber Grill Out Handle Light has a “Tilt Sensor”: Lid up - ON / Lid Closed - OFF. The power button (a) activates or deactivates the “Tilt Sensor.” For daytime use, deactivate the sensor by pressing power button (a).If you have any questions, contact Customer Service at 1-800-446-1071.
TOLERANCES 4 3/4˝ +1/8˝(3.8mm) (120.65 mm) - 1/8˝(3.8mm) 6 1/4˝ +1/8˝(3.8mm) (158.8 mm) - 1/8˝(3.8mm) 2 1/2˝ +1/8˝(3.8mm) (63.5 mm) - 1/8˝(3.8mm) Plan View Left Side View Gas Inlet WWW.WEBER.COM ®.Z223.1/NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2, or the Standard for Recreational Vehicles, ANSI A 119.2/NFPA 1192, and CSA Z240 RV Series, Recreational Vehicle Code, as applicable. WWW.WEBER.COM ® GAS SUPPLY.If you do not follow the DANGER statements exactly, the Warranty on the Summit gas grill will be voided. DANGER DANGER ® Built-In WWW.WEBER.COM ®.BUILT-IN TANK ENCLOSURE INSTRUCTIONS OPERATING ® WARNING: Only use the Weber Tank Enclosure Kit outdoors in a well-ventilated area.
Do not use in a garage, building, breezeway or any other enclosed area. ® WARNING: Your Weber Tank Enclosure Kit shall not be used under an unprotected combustible roof or overhang.LP Tank Enclosure must be built from noncombustible materials only.
NOTE: If you have questions on what materials are considered noncombustible, contact you local building supplier or fire department. ® LP Tank Enclosure Kit in a garage, WWW.WEBER.COM ®.PARTS LIST WWW.WEBER.COM ® PARTS LIST / ASSEMBLY Hose and regulator - 1 Tank stand - 1 Tank stand base - 1 Tank Scale - 1 1/4-20 nut - 6 Nylon washer - 12 1/4-20 x 1/2” bolt - 6 Cylinder glide - 2 1/2”.MOUNTING HARDWARE NOT INCLUDED. LP TANK ENCLOSURE GAS LINE LOCATIONS Area should be kept clear of sharp, jagged, or extremely abrasive surfaces to avoid possible damage to gas supply lines. Exercise caution when pulling gas lines through built-in structure. ASSEMBLY WWW.WEBER.COM ®.Typical tank cabinet or tank enclosure location Side View Top of Box Back of Box Corrugated Gas Line to Manifold 90° fitting 1/2” (12.7 mm) Flared Gasket Cap (Optional Side Burner) WWW.WEBER.COM ® GAS SUPPLY ® Built-In tank Enclosure Kit included.This may result in a fire or an explosion which can cause serious bodily injury or death, and damage to property. GAS SUPPLY WWW.WEBER.COM ®.NOTES.©2009 The following trademarks are registered in the name of Weber-Stephen Products Co., an Illinois corporation, located at 200 East Daniels Road, Palatine, Illinois 60067 U.S.A. Australia; Smokey Joe, Weber, Kettle Silhouette, Genesis, Austria; Kettle Silhouette, Smokey Joe, Weber, Benelux; Kettle Silhouette, Smokey Joe, Weber, Compact Grill Configura- tion, Botswana.
Events. Streams. 
Filters. Community. .